Results 1 to 10 of 42
Thread: Pegasus 12" Build Notes
Threaded View
-
09-21-2016, 06:48 PM #23
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
Ok, here's the rest of the pic's
225_ - 7.jpg
Above, tangle of wires going into the Ramps. It's mounted on a custom printed part. The fan mount is also custom.
225_ - 8.jpg
Above is a slightly different angle on the tangle of wires going into the Ramps.
That's about as good as I can do with the cell phone. To get better, I'm going to have to pull out the Nikon and do a real photo shoot. If these aren't good enough, let me know what you need to see and I'll try to get the all of the right gear set up.
BobLast edited by uncle_bob; 09-22-2016 at 12:25 PM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help