Qidi Tech 1 - Replicator 1 clone

[wirlybird]

I use this one for Dual PLA prints. http://www.thingiverse.com/thing:1542849 Printed in MG ABS at 230/110. No supports.

Have not tried that one. I did the other one and now I think I can get it to go ok. This one looks good also.

[wirlybird]

My favorite Spudgers for removing supports...
https://www.aliexpress.com/item/Best...618321470.html

Nice! I have a pretty good set of "tools" from the operating room from Dad! Really handy.

[wirlybird]

I use this one for Dual PLA prints. http://www.thingiverse.com/thing:1542849 Printed in MG ABS at 230/110. No supports.

Those are good closeups what camera?

[wirlybird]

Looks like MakerG is having another $15 grab bag sale. Any one done this yet? Curious on the colors you might get. Good savings but I really may not need a bunch of certain colors! I guess they store fine though.

[cncartist]

I'm extremely impressed with seeing the 80% completion of my first 14 hour print after installing the Carbon Fiber Z-Axis Rod Build Plate upgrade kit by jfkansas. It was a long install process, I completed the upgraded heat bed wiring as instructed by DaveB, and everything turned out great in the end.

It looks like all shaking movement has been taken out of the print/build plate and the edges are much cleaner than I've ever seen prior. I'll post a picture sometime today.

[wirlybird]

I'm extremely impressed with seeing the 80% completion of my first 14 hour print after installing the Carbon Fiber Z-Axis Rod Build Plate upgrade kit by jfkansas. It was a long install process, I completed the upgraded heat bed wiring as instructed by DaveB, and everything turned out great in the end.

It looks like all shaking movement has been taken out of the print/build plate and the edges are much cleaner than I've ever seen prior. I'll post a picture sometime today.

Nicely done!!

[DaveB]

Looks like MakerG is having another $15 grab bag sale. Any one done this yet? Curious on the colors you might get. Good savings but I really may not need a bunch of certain colors! I guess they store fine though.

I'd love to get that price, but I really have to pick the colors. Close but no cigar.

[DaveB]

Those are good closeups what camera?

Stock iPhone 6S Plus
The Imjur "Pocketgur" app then helps me upload them easily.

[cncartist]

Did the fan arrive like that or did you tighten the screw too much for the cooling fan which cracked the mount location?

[wirlybird]

Did the fan arrive like that or did you tighten the screw too much for the cooling fan which cracked the mount location?

I did the same thing in the same spot!!!