Results 3,231 to 3,240 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
-
09-20-2016, 09:06 PM #3231
- Join Date
- Feb 2016
- Posts
- 360
-
09-20-2016, 09:13 PM #3232
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
-
09-20-2016, 09:17 PM #3233
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Tried them both. The first is supposed to be able to print with minimal support but haven't tried it that way yet.
The second one I am trying with custom supports also but found the bottom isn't flat. Not the biggest deal but it leaves hollow spots on the bottom and causes the edges to lift. I am going to pull that one into Fusion and spiff up the bottom some.
-
09-20-2016, 10:05 PM #3234
-
09-20-2016, 10:24 PM #3235
-
09-20-2016, 11:26 PM #3236
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
Here is the current left blower only (with flanges) http://www.thingiverse.com/thing:1716089
I printed without any supports in MG Raptor PLA at 230/60
-
09-20-2016, 11:41 PM #3237
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
I use this one for Dual PLA prints. http://www.thingiverse.com/thing:1542849 Printed in MG ABS at 230/110. No supports.
-
09-20-2016, 11:48 PM #3238
- Join Date
- May 2016
- Location
- Annapolis, MD
- Posts
- 523
My favorite Spudgers for removing supports...
https://www.aliexpress.com/item/Best...618321470.html
-
09-21-2016, 05:49 AM #3239
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
-
09-21-2016, 05:52 AM #3240
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help