Results 1 to 10 of 396
Threaded View
-
09-20-2016, 06:41 AM #11
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
Pretty much every slicer out there has a section for gcode to send when the printer is started and when it is stopped. It is well worth looking into *what* should best be in those sections. You can do all sorts of cute things (wipe the print head at start, move the part out of the way at end) with them. There is often a bit of fine tuning in terms of what goes first or last in the file.
Bob
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help