Results 1 to 10 of 20
Thread: Why does my printer suck.
Threaded View
-
09-19-2016, 04:50 PM #16
- Join Date
- Jul 2016
- Location
- Pennsylvania, USA
- Posts
- 255
Hi
My early efforts on ABL were driven by the wood parts moving around. It was pretty much the only way I could keep things running. My experience was that the humidity mattered a lot. Let the gizmo sit for a month and fire it up .... it's all over the place. Let it run for a day, it settles down.
Up until about 30 minutes ago I was doing fine with manual bed leveling on the Pegasus. That's when the glass broke in the middle of printing a fairly large ABS part. I guess you *can* get the part to tight down to the glass
Actually a *far* more likely culprit is getting a bit over aggressive on the pad in the center of the bed.
BobLast edited by uncle_bob; 09-19-2016 at 04:56 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help