Results 1 to 10 of 396
Threaded View
-
09-18-2016, 01:44 PM #11
- Join Date
- Feb 2015
- Posts
- 371
Yes, I am heating the bed. With the old firmware I would adjust the offset in the menu system and then put that number in the firmware. This saved a few extra steps. The issue I am having is the homing command and the bed leveling command are giving me two different nozzle heights.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion