Results 1 to 10 of 110
Threaded View
-
09-17-2016, 02:13 PM #11
- Join Date
- Mar 2016
- Posts
- 68
Gotta remember that you are projecting in a cone, so the higher the resin starts, the higher you are on that cone, and thus the print will be smaller in the X/Y ranges, but not in the Z...
It'll probably be resolved by making sure the software is set correctly for that height, so it can compensate...
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help