Glad CA and I could help. If others had chimed in or if you do research on bed adhesion, you'll find there are countless other "suggestions" out there. Like CA said, this is just one of those areas each person needs to work through.

There's rarely a single, best answer to issues like these. CA likes to use heat with no brim. The one time I inadvertently used heat with PLA and swabbed painters tape, I broke my bed glass trying to remove the print. I'll almost always use a brim, especially on a tall part with low first layer area. These differences don't make either of us wrong - it just demonstrates that different things work better for different people, and sometimes even on different prints.