Results 1 to 10 of 96
Thread: Anyone used Printbite surface ?
Threaded View
-
09-08-2016, 05:00 AM #10
about 10C - I set mine at 70c and get 60c at the bed surface though bear in mind I have a 3mm aluminium plate as well as the printbite attached to me original bed.
I haven't had any issues with anything sticking when running it at 60c (surface temp)
Don't bother removing the tape, just stick the printbite on top :-)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion