Close



Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Administrator Eddie's Avatar
    Join Date
    Sep 2013
    Location
    Cape Coral, FL
    Posts
    1,844
    Follow Eddie On Twitter Add Eddie on Facebook Add Eddie on Google+ Add Eddie on Shapeways Add Eddie on Thingiverse

    What is your backer amount?

    How much did you guys give to Peachy Printer as a Backer either through Kickstarter or Indigogo?

    Feel free to share.

    Ed

  2. #2
    Super Moderator DrLuigi's Avatar
    Join Date
    Oct 2013
    Location
    Belgium
    Posts
    502
    Well i didnt back them up yet,

    At the speed they are and will improve this machine its just not realy smart yet in my stand point to buy one yet,

    Of course without backers they wont get any money to improve there product, But from a consumer stand point its just, its to early to realy call it a succesfull printer yet,

    Great idea and such, but i will rather wait so the starter problems are out ^^
    But ye they seem to work great on this device and seem to work with passion at this device.

  3. #3
    Technician Lindros_bigE's Avatar
    Join Date
    Sep 2013
    Location
    Philadelphia, PA
    Posts
    69
    I decided to back it at the $100 pledge. Only 1 of these remain.

  4. #4
    I backed both campaign one each (99 + 100) - although I think it is fanciful and possibly a vapour ware at the moment but I hope with the amount of money they will be getting - it could possibly turned into something.

  5. #5
    Super Moderator
    Join Date
    Sep 2013
    Location
    Saskatchewan, Canada
    Posts
    294
    Backed it with $150 at kickstarter to get a full kit.

  6. #6
    I backed at the pro level.

  7. #7
    i backed at the beta tester level ($600). im really looking forward to it

  8. #8
    Technician
    Join Date
    Oct 2013
    Location
    nsw australia
    Posts
    81
    I also did a beta test level and am really looking forward to sitting down and figuring out the simplest/most reliable way to set up and align the baby, and am thinking about using some small tubs of approx 7 litres for the development, and near the end will probably go to about 35 litres or perhaps larger

  9. #9
    Pro backer here.

  10. #10
    Technologist Kingoddball's Avatar
    Join Date
    Oct 2013
    Location
    Syd - Aust
    Posts
    193
    Aww Not a pro.. Just a printer and Stands/containers = $170'ish

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •