Results 1 to 10 of 48
Threaded View
-
08-25-2016, 03:31 AM #17
- Join Date
- Jun 2015
- Location
- Sydney Australia
- Posts
- 36
Sorry about that, it's hard not having the sensor, it looks like all you need to do is connect the orange cable to PB7, and the white cable to Z-MIN pin, if you like you can leave the other cable (+5v and GND) as per current connection, that should do the trick.
My BLTouch is due to arrive around 12th September.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion