Results 1 to 10 of 11
Threaded View
-
08-24-2016, 07:51 AM #4
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
3 watt wouldn't cut your finger nails tough. You need to have an IR CO2 laser at the very least to cut owt thicker than half a mm.
They do tend to be enclosed but the bigger ones have doors so you can slide big sheets in there.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion