Results 1 to 3 of 3
Threaded View
-
08-23-2016, 09:45 PM #3
- Join Date
- Aug 2016
- Posts
- 4
Jeep Guy at
http://www.fabric8r.com/forums/showt...g-this-working
In the slicer under printer is a GCODE add on just remove the G28 lines
And after manual 0 use the
G92 X0 Y0 Z0
This got mine working at least.
Good Luck
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help