Results 1 to 10 of 17
Thread: PETG Retraction tests etc
Threaded View
-
08-15-2016, 12:13 PM #7
- Join Date
- Jan 2015
- Posts
- 445
so i went with extrusion width .4 (not automatic).
multiplier .93
layer height .2
first layer 100%
XY movement of 40mm/s to match printing speed.
Results are better .
Its probably considered pretty damm good for pETG, but if i am going to be printing some larger objects on a 16x16 bed i want to really get it dialed in.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion