Results 1 to 10 of 16
Threaded View
-
08-15-2016, 05:05 AM #8
- Join Date
- Jul 2016
- Posts
- 9
At the moment, the only thing you need to adjust the thickness of your paper. Unless you have a very unusual piece of paper, which will be in the range of -0.05 to -0.25 mm. It has nothing to do with the data from the G29. It relates only to your paper. Make sure your G code information in its appropriate default to run on these beds.
MODERATOR NOTE: Post is late to appear due to unexpected delays in obtaining moderator approvalLast edited by printbus; 09-16-2016 at 11:05 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help