Results 1 to 3 of 3
Thread: Brass cast of a Wax Print
-
08-09-2016, 09:38 AM #1
Brass cast of a Wax Print
This was a backyard gravity cast using recycled brass. The wax print was at 200-micron resolution, then later polished with mineral spirits.
This was a fun and rewarding experience to complete. I look forward to doing some more casting in the future.
The original model was found here.
-
08-10-2016, 05:46 AM #2
-
08-10-2016, 07:20 AM #3
It certainly is! We have been making 1.75mm and 2.85mm for a while now. Both available in 1Kg spools. http://machinablewax.com/product.php?product=52
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners