Results 1 to 10 of 16
Threaded View
-
08-04-2016, 05:45 AM #10
I think it's mainly down to the high temps you need for abs. For whatever reason a lot of us start out with abs, so the beds get a real hammer in the expansion and contraction stakes right from the start.
The knp has a 4 mm aluminium plate and that's stayed flat - but it's never been heated beyond 60, mostly it gets used with an unheated bed.
Can you get aluminium bolts/screws ? would be interesting to try 3mm aluminium bed with aluminium fastenings and see if it makes any difference.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help