Results 1 to 4 of 4
Thread: please help 3d printer delta
Threaded View
-
08-01-2016, 04:45 AM #4
- Join Date
- Jul 2016
- Posts
- 2
everything works correctly as it enters the manual control. You can normally move up and down each engine, but it can not be calibrated, during calibration moves like in the video
Moderator note: Late post due to unexpected delay in obtaining moderator approvalLast edited by printbus; 09-17-2016 at 12:28 PM.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help