Close



Page 261 of 411 FirstFirst ... 161211251259260261262263271311361 ... LastLast
Results 2,601 to 2,610 of 4110
  1. #2601
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Quote Originally Posted by DaveB View Post
    W, how is the Flexion install going?

    The one question I am going to have is that they have a FFF Profile for S3D but it is for the Replicator/FlashForge. Don't know if I should actually use it or just work the settings for the QIDI profile. Maybe someone who knows more than me can look at them and see what the real difference is.

  2. #2602
    Engineer-in-Training
    Join Date
    Feb 2016
    Posts
    360
    Hey wirly...got your package Monday, should be no problems.

    Have had a crazy busy week, but should be able to get on this sun or mon.

  3. #2603
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Quote Originally Posted by Syd_Khaos View Post
    Hey wirly...got your package Monday, should be no problems.

    Have had a crazy busy week, but should be able to get on this sun or mon.

    No worries just thought it would be a cool project to demo the capabilities of 3D printing.

    What do you use for CAD? I am using Fusion 360.

  4. #2604
    70%? WOW, that means your layer height * 0.7 is your first layer height and that is rough going. You would need a dead flat, and trammed, bed or no dice.

  5. #2605
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Quote Originally Posted by DarkAlchemist View Post
    70%? WOW, that means your layer height * 0.7 is your first layer height and that is rough going. You would need a dead flat, and trammed, bed or no dice.

    At 90 I am getting gaps and skipping of the infill for the first layer. I am going to test more but it doesn't seem to correspond with leveling. That's why I was wondering about irregularities in the glass.

    Always open to suggestion for settings in S3D.

  6. #2606
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Anyone have a particular cable chain they like the design of?

  7. #2607
    Quote Originally Posted by wirlybird View Post
    At 90 I am getting gaps and skipping of the infill for the first layer. I am going to test more but it doesn't seem to correspond with leveling. That's why I was wondering about irregularities in the glass.

    Always open to suggestion for settings in S3D.
    Irregularities are fine as long as they do not go outside of your first layer height. My I3's bed has a max difference of 0.2mm from its highest point to its dead 0mm point so I try and keep it at 0.28mm (uses a 0.35mm nozzle) for a first layer height.

    This is the one thing S3D does 100% wrong because it should never be based on a percentage but on a set value and why it hasn't ever been changed I don't understand it. If I print at 0.1mm height I have to go figure out what a 0.28mm first layer height's percentage would be (0.32mm for a Qidi's 0.4mm nozzle) and if I change my layer height to something else I have to go do it all over again when the other slicers did this right so I don't have to keep effing with it every single time I just want to make a print with a different layer height. You *MUST* do this to insure that your first layer height does not go over your nozzle size * 0.8.

    btw, doing it via a percentage can lead to some weird values for the first layer height if you look at the gcode.

  8. #2608
    Quote Originally Posted by DaveB View Post
    That is an elegant solution! Do you ever accidentally knock the door causing it to close?
    Coming back to this - I made a new open hinge version that only lets go of the door 30 degrees from vertical. It also includes the slide to lock open feature, and won't pop off the hinge in that position.

    http://www.thingiverse.com/thing:1697406

    I chose 30 degrees from vertical so that you can one-hand open the door through the whole part of the motion that wants to knock the door off the hinge. At 30 degrees, it needs your help to de-hinge.






  9. #2609
    Super Moderator
    Join Date
    Jun 2016
    Location
    Oklahoma
    Posts
    902
    Quote Originally Posted by suds View Post
    Coming back to this - I made a new open hinge version that only lets go of the door 30 degrees from vertical. It also includes the slide to lock open feature, and won't pop off the hinge in that position.

    http://www.thingiverse.com/thing:1697406

    I chose 30 degrees from vertical so that you can one-hand open the door through the whole part of the motion that wants to knock the door off the hinge. At 30 degrees, it needs your help to de-hinge.






    Looks good.

    Which glass plate bed clips are you using and how are they working?

    I had to mod some clips because my glass is not exact size.

  10. #2610
    Hey wirlybird, I made my own and I can upload the files later today. They happen to fit my borosilicate plates from China just right (friction fit). There isn't much overhang onto the build plate so they may not tolerate plates of slightly smaller dimension.
    Last edited by suds; 07-31-2016 at 02:23 PM. Reason: careless phone reply, so I said "Hay Dave" by mistake

Page 261 of 411 FirstFirst ... 161211251259260261262263271311361 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •