Results 1 to 9 of 9
Threaded View
-
07-21-2016, 10:43 AM #4Lowering the temperature will make the problem worse.
I usually up the temp a bit when printing faster. Just to get more plastic through quicker.
bear in mind that most pla has a printing range from 190 - 240. So upping the temp isn't a problem.
So for smaller nozzle just up the temp and slow print speed, it shouldn't burn.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help