Results 1 to 1 of 1
Thread: Broken Extruder Fan
-
07-18-2016, 08:53 PM #1
- Join Date
- Oct 2015
- Posts
- 12
Broken Extruder Fan
So I somehow broke my left extruder fan on my Flashforge Creator Pro . No idea how it broke so easily but the end of the filament got caught in the fan while I was loading for like two seconds and this was enough to break off two fan blades. Now when the fan operates it makes a loud buzzing sound and I'm not sure if it would cool as well. Is it hard to replace the fan?
I'm a novice to hardware and electronics. I've done some light soldering/ putting stuff together but not much. I hope it's easy cause this really sucks. I've been doing hours of printing and really getting the hang of 3D printing and now this happened . I emailed Tang and I'm sure he will give me instructions as he did before when I had to do repairs in the past, but I'd appreciate any suggestions on here as well. I tried Googling around but couldn't find a step by step guide for a novice like me.Last edited by ViralCipher; 07-18-2016 at 09:29 PM. Reason: Adding specific printer
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help