Results 1 to 3 of 3
Threaded View
-
07-18-2016, 04:42 PM #3
- Join Date
- Jul 2014
- Location
- Van Nuys, CA
- Posts
- 22
They changed the Z_RAISE_BEFORE_PROBING to something a little different, at least in 1.1.0-RC6. It is now here:
Code:// @section homing #define MIN_Z_HEIGHT_FOR_HOMING 6 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help