Results 1 to 10 of 31
Threaded View
-
07-12-2016, 02:57 AM #23
Try using blue tape or invest in a zebra plate. Adding a bit of hairspray just before printing, so it is as sticky as possible, works very well too in my experience.
What you can also try is raising the printing bed a little so that for the first layer the nozzle is very close to the bed. With blue tape, I sometimes let the nozzle just touch the tape so the first layer of plastic is extremely thin and pressed into the tape.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help