Results 1 to 10 of 10
-
07-11-2016, 12:37 PM #1
First big print from a 16A Prototype
Printed on a Hyrel 3D Model 16A prototype at 3000 mm/min:
-
07-11-2016, 01:10 PM #2
- Join Date
- May 2016
- Location
- SE Wisconsin
- Posts
- 206
What was the print time?
-
07-11-2016, 01:16 PM #3
-
07-11-2016, 02:37 PM #4
-
07-13-2016, 09:31 AM #5Printed on a Hyrel 3D Model 16A prototype at 3000 mm/min
-
07-14-2016, 07:01 AM #6
-
07-15-2016, 06:07 AM #7
lol - why would you use mm per minute. ?
Almost impossible to estimate the actual speed. Whereas mm per second. Everyone can look at a ruler and work out how fast something travels in a second.
What's the red dot in the new machine videos ?
-
07-18-2016, 07:14 AM #8
Because every gcode file that I've ever seen specifies the linear feed rate in mm/min:
G1 X134.898 Y125.559 F1500.000 ; move to first perimeter point
G1 X134.678 Y125.367 E134.06120 F1500.000 ; perimeter
G1 X134.434 Y125.228 E134.07645 ; perimeter
G1 X133.641 Y124.383 E134.13941 ; perimeter
G1 X133.437 Y124.052 E134.16051 ; perimeter
That's a positioning light, so you can see what area your work will occupy.
-
07-19-2016, 10:00 AM #9
all slicers have a choice of mm per minute and mm per second.
I have no idea why anyone would want mm per min for print speed.
For filament feedrate maybe, but print speed ? makes no sense.
-
07-19-2016, 06:44 PM #10
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help