Results 1 to 10 of 12
Threaded View
-
03-13-2014, 04:04 PM #5
- Join Date
- Mar 2014
- Posts
- 6
It is too big at full size for my printer so I scale it to .18 in Repitier. If the platform could be around 3 mm bigger than the base of the dog and maybe .18mm thick (6 layers at .03mm) would work great I think. If you can do all that on the original size, I can scale it down to the size I need. Thanks for your help!
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help