Results 1 to 6 of 6
Thread: Over/under extrusion?
Threaded View
-
06-22-2016, 09:24 PM #3
- Join Date
- Oct 2014
- Posts
- 31
ABS at 260/110. I also tried it at 240 and it looks about exactly the same, and 225 (which had too little layer adhesion).
Printing at 60mm/s with Outline Underspeed of 40%, Solid Underfill Underspeed of 80%.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion