Results 1 to 2 of 2
Thread: x homing in wrong direction
Threaded View
-
06-18-2016, 01:31 AM #2
- Join Date
- Jan 2015
- Posts
- 36
Sounds like you need to alter the offset between the hotend and the bed.. if you look in the marlin config file for "#define Z_PROBE_OFFSET_FROM_EXTRUDER"
You can also use gcode to set it "M206 Z5" would add 5mm to the offset (you can also use negative numbers) once set issue a M500 to store in EPROM you don't have to set it every time you turn the printer off
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion