use a gluestick. best all round temp for pla is 210, bed temp at 50c
And your only problem with pla will be gettign the bloody thing off the bed :-)

Abs, never got it to succesfully stick to anything and no longer have any use for it anyway :-)

Everything else has either stuck to pva (cheap gluestick) or printbite (what i use now for most things). For flexible tpu filaments I have to use pva because it sticks way way to much to the printbite.

The other thing is to make sure your first layer goes down at betweenm 10-20 % of the full print speed. slower you print the first layer the better the chance that it will stick well.