Results 1 to 7 of 7
Thread: Shifted Bottom Layers
Threaded View
-
06-10-2016, 06:18 PM #3
No pictures made it into the post. If your bed is mounted on springs, it can shift part way through a print. I've had this happen because I pulled too hard on the springs to get a part off the glass and sort of shifted the beds position. Later, on the next print with the bed shaking back and forth, the bed kind of re positions itself where it wants to be. And I got shifted layers.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion