Results 1 to 10 of 12
Thread: I need Technical Help
Threaded View
-
06-08-2016, 11:16 AM #7
PVA shouldn't go above 190 or 195, no matter what the Manf. says. It burns up and congeals at a very low temp compared to PLA/ABS.
PVA shouldn't go above 190 or 195, no matter what the Manf. says. It burns up and congeals at a very low temp compared to PLA/ABS.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion