Results 41 to 50 of 73
Thread: Diy it?
-
05-27-2016, 02:22 PM #41
- Join Date
- Sep 2013
- Posts
- 308
-
05-28-2016, 01:50 PM #42
- Join Date
- May 2014
- Posts
- 60
GOOD NEWS EVERYBODY!
I've converted the PCB to Kicad, for anyone who would rather use that then eagle. (I have kicad installed, and would rather not have to have eagle installed as well)
https://github.com/oninoshiko/peachyprinter-pcb
This repo ONLY has the mini-1.14 version, which I believe is the version Peachy was preparing to ship. I'm still working on cleaning it up a little, so, YMMV.
EDIT: I've got it down to 5 ERC errors... (I'm not really sure about fixing these, so I'm leaving them for now. When/if I have some free time, I'll revist that cleanup)
EDIT 2: Hey @rylangrayston, can we get an offical license for these? There isn't one there, so my repo is probibly (technicaly) violating your copyright.Last edited by oninoshiko; 05-28-2016 at 03:05 PM.
-
05-29-2016, 11:05 AM #43
- Join Date
- Mar 2014
- Posts
- 13
I totally read that in Professor Farnswort's voice.
Now that the board is progressing, the only component I personally need are the mirrors. I can probably source everything else locally.
@rylangrayston I am sure you tested numerous mirrors, which company produced the ones you have now?
I will gladly pay for postage if you can pop 2 sets of mirrors into an envelope and send them to me. 😆
-
05-31-2016, 07:05 AM #44
- Join Date
- May 2014
- Posts
- 5
I have a little Question abou the printing itself .
On earlyer video's i saw oszilated lines from the laser .. like a full picture at once .. in the last one i think i see just a wandering point (more like the extruder type of printing , the movement i mean)
Is my observation corect ? does the galvo just have to make slow movements ?
-
05-31-2016, 11:14 PM #45
- Join Date
- Sep 2013
- Posts
- 308
-
06-03-2016, 03:13 PM #46
- Join Date
- Jul 2014
- Location
- BC Canada
- Posts
- 20
How do you download from The Github repositories? Other github repositories I've used had a "download files" button and signing up appears to create a new repository.
I've been copy & pasting from the RAW text view into notepad but this is getting tedious fast!
Please enlighten this Git nub.
-
06-03-2016, 04:16 PM #47
- Join Date
- Jun 2014
- Location
- Burnley, UK
- Posts
- 1,662
Install git then git clone the files.
-
06-05-2016, 05:12 PM #48
- Join Date
- Mar 2016
- Posts
- 68
-
06-06-2016, 04:08 AM #49
- Join Date
- May 2014
- Posts
- 4
-
06-06-2016, 12:39 PM #50
- Join Date
- Mar 2016
- Posts
- 68
The resin needs to be exposed to UV light "X" amount of time to set. You can do that in 2 ways: quick repeated passes (so you would actually see it as lines, not a dot) or slowly so it only needs a single pass... Total amount of exposure time required remains the same in both options!
The latter allows for more accuracy...
Which one would you prefer?
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help