Results 1 to 7 of 7
Threaded View
-
05-21-2016, 09:38 PM #5
- Join Date
- Apr 2016
- Posts
- 17
The PEI (Ultem) is the actual top of my print surface. Currently my PEI sheet is attached with 3M tape to my Aluminum build plate.
I totally agree with you regarding eating up too much Z-axis height. I was trying to avoid using thermal paste because of how messy it can be, but that could be an alternative. My goal is maximum heat transfer to the print surface.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help