Results 1 to 10 of 49
Thread: Itty Bitty Double FLEX V2
Threaded View
-
05-14-2016, 04:48 PM #30
Yes, that's a lot better. It still looks a little overextruded to me. Here's an example of one I pulled out of my scrap box:
IMG_2552.jpg
This one is definitely underextruded. I think it was printed with eSteps set at 610. The top isn't quite filled in and the centers of the letters aren't closed. But it is clean.
There's a little curling of the bottom layers where the 45 degree overhang is because I wasn't running a cooling fan for this print.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion