Results 1 to 10 of 48
Thread: I need two tiny gears
Threaded View
-
05-08-2016, 07:42 AM #27
- Join Date
- May 2016
- Location
- Michigan
- Posts
- 22
When you say make the small gear teeth longer, do you mean make it deeper to keep the diameter of the gear the same that will make the teeth look longer? If so, that will work. I am sure that is what you mean, because if you just make the teeth longer, then the diameter of the gear will be bigger than the tire diameter.
Is your motor gear (bigger gear) the same diameter as my white gear seen in the picture in my other reply? If so, then yes we will have to fix the small gear.
As for the thickness, here is a picture of my white gear that is perfect in thickness. Would that white gear be 1mm thick? If so, go with that.
thickness.jpg
As for the money, we can talk about that in PM. I am good for paying you something for your time/work you put in this and for the amount of gears I want printed out along with the shipping cost. Yeah, these are very light in weight. So like you said, shipping will not cost much.
Thanks,
TonyLast edited by Tonyj; 05-08-2016 at 07:54 AM.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help