Results 1 to 8 of 8
Threaded View
-
05-07-2016, 03:26 PM #8
- Join Date
- Apr 2016
- Posts
- 5
I found the problem! It was cura!
There is a setting that says "machine center 0,0"
Machine> Machine settings> tick the box that says "machine center 0,0"
The reason my printer was printing a square was because it though it was hitting the limit of the print bed when it really wasn't.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help