Results 1 to 6 of 6
Thread: New CTC 3D owner
Threaded View
-
04-29-2016, 01:41 PM #6
- Join Date
- Apr 2016
- Posts
- 120
So, the thermistor is fitted and the bed levelled. The temps are now accurate, once the bed has heated up in the first place. 110C indicated gives about 95 on the top side and the combination of Buildtak and some hairspray seems to stick most things quite firmly.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion