Results 1 to 8 of 8
Threaded View
-
04-29-2016, 12:22 PM #3
- Join Date
- Apr 2016
- Posts
- 5
Yes, I have tried: cura, slic3r, and matter control.
I don't believe resetting the firmware will work, here's why:
When I try to print old .gcodes I had before I reset my computer they print fine (except on the wrong location on the bed.) So i dont belive the firmware is the problem.
Any Ideas? Thanks!
Printed Model of Motor Cooling Fan...
Yesterday, 02:07 PM in General 3D Printing Discussion