Results 1 to 3 of 3
-
04-28-2016, 07:47 AM #1
- Join Date
- Apr 2016
- Posts
- 2
Hictop Acrylic 3d Printer Extruder temp Sporadic
Hey guys, I am very new to 3d printing and assembled my printer myself. It worked great for the first 2 prints but now I am having all sorts of issues with my extruder. First off when heating up to the desired temp (210) it just keeps heating up till I unplug it for fear of it getting too hot. Once I get it to the temp I need by lossening the wire of the extruder to the mainboard, once it starts printing the extruder drops in temperature to about 185.
-
04-29-2016, 04:23 AM #2
Just a suggestion but... have you tried the PID tuning commands ? Do you use the manufacturer PID values ?
http://reprap.org/wiki/G-code#M303:_Run_PID_tuning
-
04-29-2016, 06:57 AM #3
- Join Date
- Apr 2016
- Posts
- 2
hmm I have not tried using PID Tuning as I just use the stock G Code from Cura but I can give it a try. Also before I even start the print. The extruder will just keep getting hotter.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion