Results 1 to 4 of 4
Thread: extruder feed jamming
Threaded View
-
04-28-2016, 06:22 AM #4
- Join Date
- Mar 2014
- Posts
- 223
The first thing I would check is if the print speed for perimeters and infill are different, maybe your infill speed is higher than what your extruder can push without stripping the filament.
The other thing is the type of infill you are using requires lots of retractions that could grind up the filament.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help