Results 1 to 9 of 9
Thread: Hey what should I get
-
04-26-2016, 11:39 AM #1
- Join Date
- Apr 2016
- Posts
- 6
Hey what should I get
Brand new to 3d printing, and I am fine with a kit. Budget is 250. Looking at these two
http://www.ebay.com/itm/Print-5-mate...-/331822896453
and
https://www.monoprice.com/product?c_...seq=1&format=2
Which one is better? If none are good, what to buy?
-
04-26-2016, 11:44 AM #2
- Join Date
- Apr 2016
- Posts
- 6
and what about the oneup v2?
-
04-26-2016, 12:06 PM #3
- Join Date
- Apr 2016
- Posts
- 6
https://printrbot.com/shop/printrbot...play-assembled
could stretch to 300 if neccessary
-
04-27-2016, 04:24 AM #4
I have been satisfied with Printrbot.
They provide upgrades so you can evolve your machine without trying something out of your depth and at reasonable cost.
The tech support is great and responsive.
The product is reliable.
I would beware of ebay and chinese products : this is not an ipad you're buying, so unless you already know what you're doing you'll need spares and support. ebay resellers and chinese mainland companies do not have a good reputation for that.
-
04-27-2016, 07:58 AM #5
- Join Date
- Apr 2016
- Posts
- 6
http://www.q3dprinter.com/oneup.htm
what about this? and the geeetech has a good reputation. They send spares with you and reviews state that they are very responsive post-purchase.
-
04-27-2016, 12:15 PM #6
I've lived and worked 3 years in China. I can't buy from them directly as I know what to expect. You do whatever.
-
04-27-2016, 12:27 PM #7
- Join Date
- Apr 2016
- Posts
- 6
Does this printer make any sense
https://www.indiegogo.com/projects/a...r/x/13931197#/
to you, or should I get the printrbot?
-
04-27-2016, 01:01 PM #8
Stop. An Indiegogo project is not a product. Indiegogo is among the worst in terms of crowdfunding.
I'm afraid we won't understand each other. You are talking about the cheapest possible machine. I look 1st and foremost for a serious manufacturer with a quality product and good business practices. I can't help you.
-
04-27-2016, 01:58 PM #9
- Join Date
- Apr 2016
- Posts
- 6
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help