Quote Originally Posted by kaznad View Post
For the "PC glue" portion, just use the included scrapper to slowly remove the blue print surface. The blue sticker is rather sticky, you will have some sticky residue on it, I think some label remover might help remove it. I took out the whole build plate and it was easier to do. I dun think you can bend or warp the build plate by just removing the blue sticker. It is quite a solid piece of aluminum block.
WD40 is a good adhesive remover. Spray on and let sit for an hour or so. Use a plastic scraper so to not scratch up the aluminum. Even an ice scraper will work, but I have some vinyl install squeeges that work for this.