Results 1 to 4 of 4
-
02-23-2016, 01:08 PM #1
- Join Date
- Feb 2016
- Posts
- 2
Help with printing and scaling Game Models
Hi there! newbie here! (I have a robo3d printer, if that helps)
Ive extracted some pieces off a model from League of Legends to print for cosplay and im having a bit of trouble with the sizing and also getting it to look right in the printing software. I was able to get a couple items to print correctly, but I am not a wiz when it comes to 3d software.
I printed a bracer and with some help from the internet it came out decent but the top and bottom of the bracer filled in and i wasnt able to figure out how to stop that from happening.
Bracer
Bracer Model
I also have some armor that i would like to print but I am not sure the best way to go about it.
Armor Model
The sizing is also confusing for me as its not calculating in inches or cm (im assuming its mm?), and theres no designation on the MatterControl software or in 3Dstudio Max as to what the sizing convention is for the model. I looked on the webs to try to modify the sizing in 3DS to inches or something I could easily recognize for sizing the model but was unsuccessful in doing what i needed.
Any help would be greatly appreciated!
Thanks!
-
04-21-2016, 01:48 AM #2
- Join Date
- Apr 2016
- Location
- Gold Coast, Australia
- Posts
- 11
Your file links didn't work, if you still need a hand pm or email me, would be happy to help.
-
04-21-2016, 07:19 AM #3
- Join Date
- Feb 2016
- Posts
- 2
Ah yea, sorry about that. I redid my PC after this and move my dropbox files before the reload. I posted this in 3 different forums and was able to get some help in another one. It seems that I just needed to add a shell modifier to the models. Not really familiar with 3D Max but after this project I learned quite a bit.
Thank you for your response though!!
-
04-22-2016, 08:52 PM #4
Glad to hear it's sorted, i'll close this thread off.
Hex3D - 3D Printing and Design http://www.hex3d.com
Resin has changed after...
06-18-2024, 10:34 AM in General 3D Printing Discussion