Results 1 to 10 of 49
Thread: Itty Bitty Double FLEX V2
Threaded View
-
04-22-2016, 02:00 PM #18
- Join Date
- Feb 2015
- Posts
- 70
If I use a Hex and an E3d v6 In the Dual Flex extruder, is there a way to shim the e3d to match the height of the Hex? I assume I need them both to be at the exact same height relative to the bed.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion