Quote Originally Posted by jfkansas View Post
A 1 off isn't going to be cheap, even a flat plate with holes. Miight be able to try designing it on emachineshop.com. They will price 1 copy, but it won't be cheap either way.

Ok, on Emachine shop I was able to draw this up real quick and get live pricing. It came to 73$ shipped ups ground. Here is the kicker that was just with the 4 holes drilled. It adds $100 to countersink them and the total is $173. So if you can countersink your own holes with a drill and 90degree chamfer bit then it wouldn't be too bad. If you get 4 plates with just holes drilled the price goes down to 33$ each, again you'd have to countersink your own holes.