Originally Posted by
cncartist
I do have the issue of the rear Y-Axis rod being bent and I fear it is causing issues as the machine has developed a creaking when printing but it hasn't affected print quality too much from what I can tell. I greased all the rods/bearings properly with Super Lube and clean them if they accumulate too much grime but the creaking seems to be happening in the rear right corner of my machine. I will most likely contact QIDI support shortly as I just received the machine and I am willing to disassemble and correct the issue if there is a faulty bearing, etc. Video has been captured of the sound + movement in Y-Axis rod but hasn't been uploaded yet.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help