Results 1 to 10 of 36
Threaded View
-
04-06-2016, 03:47 PM #16
- Join Date
- Oct 2013
- Location
- nsw australia
- Posts
- 81
cescoaiel, in my limited experience with fff printers a 0.3mm layer height is poor res, a 0.1mm layer height is ok, a 0.03mm is very fine (note all of these are on FFF printers), and the peachy should be able to get into the 0.003mm layer height(depending upon the container size and drip speed) so should be able to produce prints that would please almost anybody that can accept a single colour object with the ability to add dyes to the resin to colour it
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help