Results 1 to 10 of 16
Thread: Aluminum Print Bed?
Threaded View
-
03-05-2014, 06:32 PM #15
Heating the bed can take a lot of power. That's one of the problems when scaling up. For an 8x8 I have used 2 ohms of resistance at 12 volts, about 6 amps. At that level you have to worry about the resistance of your wiring and connections. I suggest that if at all possible you heat the bead with more voltage and less current.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion