Results 1 to 10 of 14
Thread: Plans for large 3d printer?
-
03-22-2016, 11:05 AM #1
- Join Date
- Feb 2016
- Posts
- 10
Plans for large 3d printer?
I currently have 2 prusa i3 based printers that print around 200x200. Im looking for some plans for a new printer that will allow me to print 350-400mm atleast 1 way both would be preferred.
if anyone can point me in the general direction so i can get started on building and getting all the electronics in to build a new printer.
Thanks
Troy
-
03-22-2016, 02:02 PM #2
My son just built a Wilson 2, I think it prints 200 by 300. It is like a Prusa i3 in Steroids (we have three i3s), build is very beefy and prints very well.
-
03-22-2016, 04:08 PM #3
Always interested to see peoples projects so we will be watching this. I hope the build goes well. Please post photos if you have any.
-
03-28-2016, 11:29 AM #4
At Hyrel, we just announced our larger format printers, with up to 600x400x275mm (X/Y/Z). See http://3dprintboard.com/showthread.p...-from-Hyrel-3D
-
03-28-2016, 01:58 PM #5
Also look at the SEEMECNC ROSTOCK MAX v2!
Nearly 1300 cubic inches of build volume (10.5+" Diameter by 15+" height)
Comes as build it yourself kit or pre-assembled
-
04-02-2016, 09:50 PM #6
Last year I built a C-Bot, 12x12", by 21" tall (totally configurable, that's just what I chose). Great project:
http://www.openbuilds.com/builds/c-bot.1146/
http://www.akeric.com/blog/?page_id=3063
-
04-03-2016, 05:49 AM #7
Awesome looking printer AK Eric! Your blog is thorough and informative, thanks for sharing.
-
04-03-2016, 01:06 PM #8
-
04-03-2016, 09:02 PM #9
My son just completed building his new Rostock MAX v2. (I knew he could not come back from the Midwest RepRap Convention without a new printer!) Took a good bit of time but it is built like a tank and is solid as a rock! They give you everything but the two extruder fan shrouds....those are the first prints you have to do. So this is print number one, the extruder tube fan. Resolution and finish was awesome! Build volume is HUGE!
IMG_8019.jpg
IMG_8022.jpg
IMG_8010.jpg
I apologize for the sideways pictures, they show correctly on my computer and phone?Last edited by JohnA136; 04-03-2016 at 09:31 PM.
-
04-03-2016, 09:44 PM #10
Let's see if this works?
rostock.jpg
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help