Results 1 to 3 of 3
Threaded View
-
03-29-2016, 03:55 PM #2
- Join Date
- Jan 2014
- Location
- Oakland, CA
- Posts
- 935
You'd need to leave some clearance between the parts you want to have print separately, especially if you're printing them in place, since otherwise they'll be permanently stuck together. The exact amount of clearance you'll need depends on what sort of fit you want, and the characteristics of the printer you're using. You'll have better control of this if you print them separately and assemble them later.
Andrew Werby
www.computersculpture.com
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion