Results 1 to 10 of 125
Thread: 10" Pegasus Build
Threaded View
-
03-26-2016, 03:20 PM #11
Next up was the X axis belt. I had some trouble getting the belt to run centred on the idler bearings and ended up putting a second nut as a spacer on the M3x16 bolts on the X carriage to centre the belt (as seen below):
And the finished product looks like this
Notice the belt running nice and centred on the idler bearings....
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)